+44 (0) 1908 465 670 info@ghasolutions.co.uk
In Bits

In Bits

So with the engine out it was time to start looking at removing the old paint ready for re-painting. In order to protect the engine internals I made some blanking plates for the inlet and exhaust on a 3D printer.                ...
The Stripdown Continues

The Stripdown Continues

After a closer inspection, the vertical cylinder link pipe turned out to be ever so slightly secondhand, so that has been added to the list of parts to find. I am considering having the exhaust ceramic coated before it is refitted.          ...
Decisions, Decisions

Decisions, Decisions

So, now it is time to decide how I want the finished bike to look, and as a lot of it will need replacing, this will make the choices somewhat easier. I would like to replace the swing arm, with a later style box-section, purely for aesthetic reasons, and I have...
Welcome to the Blog

Welcome to the Blog

Welcome to My Ducati 749 restoration Blog, the bike in question is a 2003 Ducati 749 Biposta, is the best colour available, Yellow. I bought the bike, knowing it needed a bit of love, but my intention was to tidy it up slowly, however after a few rides, it failed to...
Finally………………..

Finally………………..

We finally fitted the two light units to finish off the interior, and made the storage box. We still have the suspension to sort but I am going to park that for a while to see how we get on with the ferry, campsites and the Eurotunnel before we go too low. The shelf...