+44 (0) 1908 465 670 info@ghasolutions.co.uk
In Bits

In Bits

So with the engine out it was time to start looking at removing the old paint ready for re-painting. In order to protect the engine internals I made some blanking plates for the inlet and exhaust on a 3D printer.                ...
The Stripdown Continues

The Stripdown Continues

After a closer inspection, the vertical cylinder link pipe turned out to be ever so slightly secondhand, so that has been added to the list of parts to find. I am considering having the exhaust ceramic coated before it is refitted.          ...
Decisions, Decisions

Decisions, Decisions

So, now it is time to decide how I want the finished bike to look, and as a lot of it will need replacing, this will make the choices somewhat easier. I would like to replace the swing arm, with a later style box-section, purely for aesthetic reasons, and I have...
Welcome to the Blog

Welcome to the Blog

Welcome to My Ducati 749 restoration Blog, the bike in question is a 2003 Ducati 749 Biposta, is the best colour available, Yellow. I bought the bike, knowing it needed a bit of love, but my intention was to tidy it up slowly, however after a few rides, it failed to...